Re-Bench Part 2
Once finished with the glue-ups of the work surfaces and dog-hole aprons, the two parts were spaced, a slot cut in the ends and a corresponding slot cut in the end apron piece.
With the end apron clamped in place, the pins are laid out from the tails.
After the pins are cut, holes are drilled into the end that correspond with holes in the work surfaces. Temporary bolts are used to hold the ends in place. Additional blocking is added as needed in the area where the tail-vise will be mounted.
Up next- Vises!
Comments
No comments posted.
Loading...
© 2012 Paul W. Jacobs Photography http://pwjacobs.com/